Skip to product information
1 of 22

Pelican

Pelican Hardigg Long Storage Case 50x17x12" Grey Brand New In Box AL4714-0505

Pelican Hardigg Long Storage Case 50x17x12" Grey Brand New In Box AL4714-0505

Regular price $329.00 USD
Regular price Sale price $329.00 USD
Sale Sold out
Shipping calculated at checkout.

Condition: New

Welcome to TheCasePlace, your best choice for waterproof storage cases. We are the nation's largest suppliers of surplus, overstock, and wholesale cases including brands like Pelican Products, SKB, ECS, Valkyrie Products, and more. 

Make sure to check out our page for more great deals. We look forward to earning your business.  


This listing is for one Pelican Hardigg Waterproof Storage Case, Brand New in box. (As seen in photos)
These units come exactly as they would from the manufacturer. 
They are grey, and do not have any foam inside. These units have latches all the way around and would be a great choice for a roof mounted case, camping, overlanding, hunting, etc. 

These cases are one of the best deals you will find on brand new Pelican Hardigg cases. It is not often that new Pelican Hardigg cases come up for sale, especially from a commercial order like these. These were ordered for a Government equipment contract and didn't end up being needed. Please reach out if interested in purchasing bulk quantities. 

From Manufacturer's Website: 
DIMENSIONS
Interior (L×W×D)
46.87 x 14.06 x 10.5 in
(119 x 35.7 x 26.7 cm)
Exterior (L×W×D)
49.87 x 17.06 x 12.19 in
(126.7 x 43.3 x 31 cm)

MEASUREMENTS
Lid Depth
5.25" (13.3 cm)
Bottom Depth
5.25" (13.3 cm)
Total Depth
10.5" (26.7 cm)
Int Volume
4 ft³ (0.113 m³)

WEIGHTS
Weight
29.5 lbs (13.4 kg)
Buoyancy
345.21 lbs (156.6 kg)

MATERIALS
Body Material
RotoMolded Polyethylene
Latch Material
Steel (Nickel-black Plated)
O-Ring Material
Silicone Sponge
Foam Material
No Foam, empty case standard
Optional PE and PU, 1 and 2 lb. options filled and lined
Purge Body Material
Aluminum
PRV Valve Material
.5 PSI Standard, Light Lift .25 PSI
Handle Material
Heavy Duty Injection Molded Standard
Optional Handles Material
Stainless Steel Passivate and Stainless Steel Black
Hardware Material
Yellow Carbon Steel Standard
Optional Hardware Material
Black Carbon Steel, Stainless Steel Passivate and Stainless Steel Black

TEMPERATURES
Minimum Temperature
-20° F (-29 ° C)
Maximum Temperature
140° F (60 ° C)

TESTING

Pelican-Hardigg Single Lid style roto cases have been designed and tested to meet or exceed the applicable requirements of the following standards. Qualification is conducted through direct testing and/or engineering analysis of product and test similarity; testing has been conducted on containers of various sizes and configurations as applicable.

  • MIL-STD-810E, Method 505.3, Procedure II – SOLAR RADIATION
  • ASTM E96, MIL-C-4150J and ASTM D 1008-64 – WATER-VAPOR TRANSMISSION RATE (PERMIABILITY)
  • FED SPECIFICATION L-P-390c, Type M. – TENSILE/ELONGATION/COMPRESSIVE/FLEXURAL
  • FED-STD-101, Method 5009 – LEAK TEST
  • FED-STD-101, Method 5016 & DOT 49CFR 178.350 – CONCENTRATED LOAD (STACK/SUPERIMPOSED)
  • FED-STD-101, Method 5011 – HANDLING
  • MIL-STD-810E, Method 514.4 – VIBRATION (COMPOSITE INPUTS)
  • MIL-STD-810E, Method 516.4, procedure IV – SHOCK (TRANSIT DROP)
  • MIL-STD-810E, Method 501.3, procedure I – TEMPERATURE (STORAGE, HIGH TEMPERATURE)
  • MIL-STD-810E, Method 502.3, procedure I – TEMPERATURE (STORAGE, LOW TEMPERATURE)
  • MIL-STD-810E, Method 507.3, Procedure I – RELATIVE HUMIDITY
  • MIL-STD-810E, Method 500.3 – ALTITUDE (LOW PRESSURE)
  • MIL-STD-210C & MIL-STD-810D, Method 510.2, Procedure I – SAND AND DUST
  • MIL-STD-810E, Method 509.3, Procedure I @ 5% – SALT FOG
  • MIL-STD-810D, Method 508.4 – FUNGUS
  • MIL-STD-810D, Method 506.2, Procedure I – RAIN WITH WIND
  • MIL-STD-810D, Method 512.2, Procedure I – IMMERSION ONE (1) METER
  • ATA 300, Category I – REQUIRMENTS FOR REUSABLE CONTAINERS
View full details